Purchase two devices, one using only one type of glue and not mixing them. If only one glue dispenser equipment is used, mix two types of glue. So when changing the glue, a comprehensive cleaning is required.


Wash any area that comes into contact with the glue. Pump body, valve, pipeline, etc. The pipeline is relatively long and difficult to clean. The AB glue bucket should also be cleaned thoroughly. Different curing agents encounter different curing agents,


It may cause glue poisoning. In addition, the configuration of the metering pump varies with different viscosities and ratios of glue, making it difficult to be compatible due to significant differences.


So using one type of glue for a device is the best option;