Automatic cleaning process of glue dispenser:


Just press the automatic cleaning switch and it will take three minutes to complete the automatic cleaning.


1. The glue dispenser first uses high air pressure to flush away the mixed AB glue in the mixing tube;


2. Then extract the cleaning solution from the cleaning bucket and rinse the mixing pipeline and mixing plate with high pressure.


3. After cleaning, install the waste cleaning solution. Put it in the waste material recycling area. Generally speaking, one cleaning is sufficient. If encountering adhesive with high viscosity, it should be cleaned two to three times until the cleaning is completed;




Cleaning parts for automatic cleaning:


The glue dispenser equipment stores AB glue separately. The glue dispenser equipment is only used in areas where two types of glue are mixed,


That is, there will be mixing at the mixing tube, and only the part of the mixing tube that needs to be cleaned.